CoolIT Vantage CPU Water Cooler Review
Installation
Contents
The installation of the CoolIT Vantage is very simple. For AMD processors, simply attach the clips shown at the top of Figure 7 to the base of the block and screw them to the motherboard frame. For Intel CPUs, put the backplate according to your CPU socket (in Figure 7, you can see one backplate for socket LGA775, one for sockets 1155/1156, and one for socket LGA1366) on the solder side of the motherboard, put the block in place and screw it to the backplate.
Figure 7: Clips and backplates
After this step, screw the radiator to the rear panel of the case, removing the existing 120 mm fan, if your case comes with one. Of course your case must have room for a 120 mm fan at its rear panel.
Figure 8: The CoolIT Vantage instaled in our case