Corsair H80 CPU Cooler Review
Installation
Contents
Figure 10 shows the backplate to be used with Intel CPUs at the left. In AMD systems, the block is installed using the existing motherboard frame, using the clips shown at the right.
Figure 10: Intel backplate and AMD clips
To install the H80 on our CPU, first we installed the backplate on the solder side of the motherboard, holding it in place with the thumbscrews shown in Figure 11.
Figure 11: Holders installed
Then, we put the block over the CPU, holding it with four thumbnuts. After that, the radiator was installed on the rear panel of the case, as shown in Figure 12.
Figure 12: CPU cooler installed