Deepcool Ice Matrix 600 CPU Cooler Review
Installation
Contents
The installation of the Ice Matrix 600 is simple. First you need to install the clips that are compatible with your CPU socket to the base of the cooler. In Figure 9, you can see the clip for Intel CPUs installed. The clips are held in place using one thumbscrew each.
Figure 9: Clip installed
Next, put the backplate that fits your CPU socket (only socket LGA1366 doesn’t require a backplate) on the solder side of the motherboard, and then attach the four nuts (shown in Figure 10) on the component side.
Figure 10: Nuts installed
After that, put the cooler in place and screw the four available thumbscrews.
Figure 11: The Ice Matrix 600 instaled in our case
Finally, attach the fan to the heatsink.
Figure 12: The Ice Matrix 600 instaled in our case