ECS KN3 SLI2 Extreme Motherboard Review

More Features (Cont’d)

Like some other motherboards from Extreme series this motherboard features a dual-BIOS solution. As far as we know only other two companies provide this feature, Gigabyte and Albatron. This feature allows you to recover the contents of your BIOS chip if the chip was erased by a virus like CIH/Chernobyl or during a bad BIOS upgrade. Called “Top-Hat Flash” you need to install the backup BIOS literally on the top of the motherboard BIOS, see Figures 7, 8 and 9.

ECS KN3 SLI2Figure 7: Backup BIOS chip.

ECS KN3 SLI2Figure 8: Installing the backup BIOS on top of the motherboard BIOS chip.

ECS KN3 SLI2Figure 9: Backup BIOS installed.

In Figure 10, you can see all cables and accessories that come with this motherboard: four Serial ATA cables, one Serial ATA power adapters, two parallel IDE flat-cable, one floppy disk drive flat-cable, one cross-over cable, one external SATA cable (Port Multiplier cable), one SLI bridge, one metallic bracket for fastening the SLI bridge to the case, one I/O bracket with two USB ports and one FireWire port, one plastic frame for putting the USB and FireWire ports on the case front panel, one parallel port bracket and one external SATA bracket.

ECS KN3 SLI2Figure 10: Cables and accessories that come with this motherboard.

This motherboard comes with two CDs with motherboard drivers and utilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *