Fractal Design Adjust 108 Fan Controller Review
Installation
Contents
The installation of the Adjust 108 is easy. You just need to open a 5.25” bay on your case, put the panel in place, attach the screws, and connect the fans to the cables.
Figure 6 presents the product cables. The power cable, shown at the left side, must be connected to the power supply using one standard peripheral power connector or a SATA power connector. The fan connectors are three-pin ones. Those connectors are also compatible with four-pin connectors found on PWM fans. The Adjust 108 is not compatible with fans that use a four-pin standard peripheral power connector (“Molex”).
Figure 6: Cables