Huntkey Balance King 5000 500 W Power Supply Review
Overload Tests
Contents
Below you can see the maximum we could pull from Huntkey Balance King 5000. If we tried to pull more than that they unit would shut down, showing a protection kicking in – which is excellent. If you pay attention you will see that we lowered the current/power at +5 V and +3.3 V compared to test number five shown in the previous page. This was done because by lowering the current on these two outputs we could increase the current at the +12 V outputs and therefore achieve a higher total wattage.
| Input | Overload Test |
| +12V1 | 23 A (276 W) |
| +12V2 | 23 A (276 W) |
| +5V | 4 A (20 W) |
| +3.3 V | 4 A (13.2 W) |
| +5VSB | 1 A (12 W) |
| -12 V | 0.5 A (6 W) |
| Total | 588.0 W |
| % Max Load | 120.64% |
| Room Temp. | 45.8° C |
| PSU Temp. | 49.0° C |
| AC Power | 782.0 W |
| Efficiency | 75.2% |
| AC Voltage | 106.0 V |
| Power Factor | 0.998 |