Huntkey V-Power 550 W Power Supply Review
Transient Filtering Stage
Contents
As we have mentioned in other articles and reviews, the first place we look when opening a power supply for a hint about its quality, is its filtering stage. The recommended components for this stage are two ferrite coils, two ceramic capacitors (Y capacitors, usually blue), one metalized polyester capacitor (X capacitor), and one MOV (Metal-Oxide Varistor). Very low-end power supplies use fewer components, usually removing the MOV and the first coil.
This power supply is flawless on this stage, having one extra X capacitor, two extra Y capacitors and one extra coil. This power supply has two MOVs located after the rectification bridge, physically squeezed between the two electrolytic capacitors, which is the usual configuration on power supplies based on the half-bridge design.
Figure 7: Transient filtering stage (part 1).
Figure 8: Transient filtering stage (part 2).
Figure 9: MOV’s.
In the next page we will have a more detailed discussion about the components used in the V-Power 550 W.