In Win BUC Case Review
The Disk Drive Bays
Contents
The In Win BUC has three 5.25” external bays, one external 3.5” bay and five internal 3.5”/2.5” bays. The external bays feature tool-less installation mechanisms, and the external 3.5” bay can be used as an internal 3.5” bay, but in this case you will have to use regular screws to install the drive.
Figure 18: Disk drive bays
Four of the internal 3.5”/2.5” bays have hot-swap connectors, but only three of them can be accessed from outside the case.
Figure 19: Hot-swap connectors
Each 3.5”/2.5” bay is a small drawer. Three-and-a-half-inch devices are installed using regular screws with rubber rings to absorb vibration. Two-and-a-half-inch devices are installed using plain regular screws.
Figure 20: Drawer