In Win Commander III 700 W Power Supply Review

Main Specifications

The main specifications for the In Win Commander III 700 W power supply include:

• Standards: ATX12V 2.31 and EPS12V 2.92
• Nominal labeled power: 700 W
• Measured maximum power: 849.4 W at 49.4° C
• Labeled efficiency: 80 Plus Gold certification (87% at light/20% load, 90% at typical/50% load, and 87% at full/100% load) 
• Measured efficiency: Between 86.6% and 90.6% at 115 V (nominal, see complete results for actual voltage)
• Active PFC: Yes
• Modular Cabling System: Yes, partial
• Motherboard Power Connectors: One 20/24-pin connector and one cable with two ATX12V connectors that together form an EPS12V connector, permanently attached to the power supply
• Video Card Power Connectors: Four six/eight-pin connectors on two cables, one permanently attached to the power supply and one on the modular cabling system
• SATA Power Connectors: Nine on three cables, modular cabling system
• Peripheral Power Connectors: Three on one cable, modular cabling system
• Floppy Disk Drive Power Connectors: One
• Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), and short-circuit (SCP)
• Are the above protections really available? Yes.
• Warranty: Five Years
• More Information: https://www.inwin-style.com
• MSRP in the U.S.: USD 130.00