Kingwin Power Force 850 W Power Supply Review

Main Specifications

The main specifications for the Kingwin Power Force 850 W power supply include:

• Standards: ATX12V 2.2 and EPS12V 2.92
• Nominal labeled power: 850 W
• Measured maximum power: 967.4 W at 47.8° C
• Labeled efficiency: 85% minimum at typical (50%) load, 80 Plus Bronze certification (minimum of 82% at light/20% load, 85% at typical/50% load, and 82% at full/100% load)
• Measured efficiency: Between 81.8% and 86.8%, at 115 V (nominal, see complete results for actual voltage)
• Active PFC: Yes
• Modular Cabling System: Yes, partial
• Motherboard Power Connectors: One 20/24-pin connector, two ATX12V connectors that together form an EPS12V connector, and one EPS12V connector, permanently attached to the power supply
• Video Card Power Connectors: Four six/eight-pin connectors on four cables, modular cabling system
• SATA Power Connectors: Eight on two cables, modular cabling system
• Peripheral Power Connectors: Six on two cables, modular cabling system
• Floppy Disk Drive Power Connectors: Two on two cables, modular cabling system
• Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), over temperature (OTP), and short-circuit (SCP) protections
• Are the above protections really available? Yes.
• Warranty: Five years
• Real Model: High Power DP-850 BR
• More Information: https://kingwin.com
• Average Price in the U.S.*: USD 110.00

* Researched at Newegg.com on the day we published this review.