Lancool PC-K65 Case Review

Inside the Lancool PC-K65

Both panels are attached to the chassis using black thumbscrews. The motherboard tray has a huge hole for you to access the backplate of the CPU coolers without having to remove the motherboard from the case, some clips for you to fasten cables using cable ties, and a plastic cable organizer. Places for routing and hiding cables are abundant.

Figure 11: Overall look

Figure 12: A view behind the motherboard tray

In Figure 13, we get another overall look inside the case. Expansion cards are fastened using silver thumbscrews. The Lancool PC-K65 supports video cards up to 11.2” (285 mm) long if the top hard drive cage is installed or up to 16.3” (415 mm) if this cage is removed. The reviewed case supports CPU coolers up to 6.3” (160 mm) tall.

Figure 13: Overall look

The power supply is installed at the bottom of the case. It can be installed with either its bottom fan facing up or facing down, so you can decide if you want the fan of your power supply pulling air from inside the case or from outside of it. As shown before, there is an air filter for the power supply fan.

Figure 14: Power supply compartment

There are several holes on the bottom panel for you to easily install components of liquid cooling solutions (e.g., the pump and/or the water tank).

Figure 15: Holes for installing components of liquid cooling solutions