Lancool PC-K65 Case Review
The Bottom and Rear Panels
Contents
The bottom panel of the Lancool PC-K65 has a mesh with an air filter for the power supply fan. The rear panel and the interior of the Lancool PC-K65 are not painted. While this is a major drawback compared to competing products, it certainly helped the manufacturer to keep the cost of this case below the USD 100 mark.
On the Lancool PC-K65, the power supply is installed at the bottom of the case.
The product comes with a 120 mm fan installed on its rear panel (Lian Li LI121225SL-4), using rubber rings to reduce vibration and noise. This fan uses a three-pin fan power connector, but it comes with an adapter in case you want to connect it directly to the power supply.
This case has eight expansion slots with vented slot covers.
There are two holes with rubber covers for hoses of liquid cooling solutions, measuring 0.63” (16 mm) in diameter.
The rear panel has a loop for you to install a padlock or a warranty seal in order to prevent unauthorized people from opening the computer.
Figure 10: Loop for padlock or warranty seal
Let’s now take a look inside the Lancool PC-K65.


