Noctua NH-C14 CPU Cooler Review
Installation
Contents
In Figure 12, you can see the hardware used to install the NH-C14 on Intel CPUs. The backplate goes on the solder side of the motherboard, and the metal holders stay at the component side. In Figure 13, you can see this holding system installed on our motherboard.
Figure 12: Intel holders
Figure 13: Holders installed on the motherboard
After installing the holders, the cooler is screwed to them (it comes with a long Phillips screwdriver). In Figure 14, you can check the cooler installed.
Figure 14: Instaled in our case