NZXT H630 Case Review

The Front Panel

The front panel of the NZXT H630 has two 5.25” bays with solid covers.

Figure 3: Front panel

The case has a thick, rubber-coated foam to dampen the noise produced by the computer.

Figure 4: Foam on the front panel

The reviewed case comes with one 200 mm fan installed on its front panel (no technical specifications for this fan are provided). You can move this fan up or you can install a 120 mm, a 140 mm or a second 200 mm fan. If you remove the 200 mm fan that comes with the case, you will be able to fit two 140 mm fans or three 120 mm fans. The front panel also supports radiators up to 360 mm in length.

Figure 5: Front fan

On the side of the front panel, the case has an on/off button for the rear panel LED, the audio jacks, two USB 3.0 ports, two USB 2.0 ports, and an SD memory card reader. The USB 3.0 ports use an internal connector.

Figure 6: LED button, connectors, and the memory card reader

One of the highlights of the reviewed case is the ability of removing the bottom air filter without the need to lift the case, as you can see in Figure 7.

Figure 7: Bottom air filter