NZXT H630 Case Review

The Disk Drive Bays

The NZXT H630 has two external 5.25” bays, two internal 2.5” bays (behind the motherboard tray), and eight internal 3.5”/2.5” bays in three cages. You can install 5.25” and 3.5” devices without the use of screws or tools.

Figure 18: Default configuration of the disk drive bays

Figure 19: The two 2.5” bays behind the motherboard tray

The 3.5”/2.5” bays are accessible from the right-hand side of the case, and not through the left-hand side as usual. See Figure 20.

Figure 20: Default configuration of the disk drive bays

The NZXT H630 provides a very flexible configuration for its hard drive cages, as you can move and remove them as necessary, to either allow the installation of video cards longer than 13.9” (354 mm) or to improve airflow.

Each 3.5”/2.5” bay is actually a small drawer, and they come with rubber rings to reduce the vibration and noise produced by 3.5” hard disk drives.

Figure 21: One of the 3.5”/2.5” bays