Overload Tests
Contents
Below you can see the maximum we could pull from this power supply. Here we were limited by our load tester, which can only pull up to 1,000 W. During this test the +3.3 V output was presenting a value below the minimum allowed (+3.100 V vs. +3.135 V), and noise level at +5 V and +3.3 V was above the maximum allowed (at 51.2 mV and 67.6 mV, respectively).
| Input | Overload Test |
| +12VA | 32.5 A (390 W) |
| +12VB | 32.5 A (390 W) |
| +5V | 26 A (130 W) |
| +3.3 V | 26 A (86.8 W) |
| +5VSB | 3 A (15 W) |
| -12 V | 0.5 A (6 W) |
| Total | 996.4 W |
| % Max Load | 117.2% |
| Room Temp. | 44.4° C |
| PSU Temp. | 46.6° C |
| AC Power | 1,229 W |
| Efficiency | 81.1% |
| AC Voltage | 99.6 V |
| Power Factor | 0.996 |
Leave a Reply