NZXT HAVIK 120 CPU Cooler Review
Installation
Contents
Figure 10 reveals the backplate used to install the cooler. You must install the screws at the backplate in the holes matching the socket used by your CPU.
Figure 10: Backplate
After putting the backplate on the solder side of the motherboard, you need to insert four plastic spacers, install the two metallic bars and hold them with four thumbnuts, as shown in Figure 11.
Figure 11: Frame installed
Then put the cooler over the CPU and hold it in place, screwing the transversal holder to the bars.
Figure 12: Heatsink installed
The last step is to install the fans, as you can see in Figure 13.
Figure 13: Fan installed