NZXT Respire T20 CPU Cooler Review
Installation
Contents
Figure 11 shows the backplate and the four screws that must be installed on the solder side of the motherboard prior to installing the Respire T20; it also displays the plastic spacers that go on the component side.
Figure 11: Backplate
In Figure 12, you can see the two metal pieces wherein the cooler will be screwed.
Figure 12: Metal holders
Put the heatsink in place, and attach it to the metal pieces using a third bar and two nuts.
Figure 13: Heatsink installed
Finally, reinstall the fan.
Figure 14: Installation finished