NZXT Sentry Mesh Fan Controller Review
Installation
Contents
The installation of the Sentry Mesh is easy. You just need to open a 5.25” bay on your case, put the panel in place, attach the screws, and connect the fans to the cables.
Figure 6 presents the product cables. The power cable, shown at the right side, must be connected to the power supply. The fan connectors are three-pin ones, without the rpm sensing pin.
The NZXT Sentry Mesh is not compatible with fans that use a four-pin standard peripheral power connector (“Molex”) or a micro four-pin connector (PWM fans).
Figure 6: Cables