NZXT Sentry Mesh Fan Controller Review
Operation
Contents
The operation of the NZXT Sentry Mesh is extremely easy and intuitive. You just need to slide each potentiometer up and down in order to control the speed of the respective fan. At the upper position the fan will be at full speed, and at the lower position it will be running at approximately 40% power.
The controller also has a white LED at the right, which indicates that the panel is powered on.
A problem we found with this controller is that it doesn’t sense the fan in any way. There is no indication that each fan is actually spinning, so if a fan were disconnected, blocked or burned, you will not know it unless you open your case and check the fan on your own.
Figure 7: The Sentry Mesh working
