Sentey Arvina GS-6400R Case Review

Introduction (Cont’d)

The top panel of the Sentey Arvina GS-6400R can be seen in Figure 4. Below the big black mesh there are two 120 mm fans that glow red when turned on, and you can replace them with two 140 mm fans. No technical information about these fans is provided. The GS-6400R features an air filter on its top panel, which is overkill, since the top fans work blowing air from inside the case to the outside.

Figure 4: Top panel

The Arvina GS-6400R comes with four on/off switches for its fans, as you can see in Figure 5. It also comes with four USB 2.0 ports, one SATA port, and a standard SATA port, and a standard SATA power connector. The case comes with the cables required to use these connectors.

Figure 5: Buttons and connectors

The bottom panel has an air filter for the power supply fan and for the optional bottom fan.

Figure 6: Bottom panel

The rear panel and the interior of the Sentey Arvina GS-6400R are painted black. The power supply is installed on the bottom part of the GS-6400R. The case comes with seven expansion slots with vented covers, and a small ventilation mesh above the area where expansion cards are installed. Two holes protected by rubber covers are available for hoses of liquid cooling solutions. One 120 mm fan identical to the ones used on the top panel is available on the rear panel, and also glows red when turned on.

Figure 7: Rear panel

Let’s now take a look inside the Sentey Arvina GS-6400R.