Sentey Halcon GS-6050 II Case Review

The Top Panel

The top panel of the Sentey Halcon GS-6050 II is meshed and comes with another two 120 mm fans identical to the ones used on the left and front panel, also glowing blue when turned on. Each is connected to a standard peripheral power plug.

Figure 6: Top panel

The case comes with three USB 2.0 ports, one USB 3.0 port, and the traditional audio jacks. The USB 3.0 port utilizes an external connector, so you must route its cable to the exterior of the case and connect it to a USB 3.0 port located on the rear panel of the motherboard. We think this is one of the most visible drawbacks to this case, since currently, internal USB 3.0 headers are standard, and we don’t see a reason to not use an internal USB 3.0 connector.

Figure 7: Buttons and connectors