Sentey Halcon GS-6050 II Case Review

The Bottom and Rear Panels

The bottom panel has a big air filter for the power supply fan and for the optional bottom fan.

Figure 8: Bottom panel

The rear panel and the interior of the Sentey Halcon GS-6050 II are painted black.

The case has seven expansion slots, using vented covers. These covers are not reusable; once you remove the cover you must toss it away.

There is a 120 mm fan on the rear panel that is identical to the other fans used on the product, meaning that it also glows blue when turned on and is connected to a standard peripheral power plug.

On the Sentey Halcon GS-6050 II, the power supply goes on the bottom part of the case.

There are two holes protected with rubber covers for hoses of liquid cooling solutions (and also to route the USB 3.0 cable to the exterior of the case), each measuring 0.70” (18 mm) in diameter.

Figure 9: Rear panel

Let’s now take a look inside the Sentey Halcon GS-6050 II.