SilverStone Precision PS06 Case Review

Inside the SilverStone Precision PS06

Both panels are attached to the chassis using black thumbscrews, which is great. The motherboard tray has a huge hole for you to access the backplate of the CPU cooler without having to remove the motherboard from the case, several holes for you to route cables behind it, and several metallic clips for you to fasten cables behind the motherboard tray using cable ties.

Figure 14: Overall look

Figure 15: A view behind the motherboard tray

In Figure 16, you have another overall look inside the case. Expansion cards are fastened to the case using black thumbscrews. The PS06 supports video cards up to 12.2” (310 mm) long and CPU coolers up to 7” (179 mm) tall.

Figure 16: Overall look

The power supply is installed at the bottom of the case. Note that it can be installed with either its bottom fan facing up or facing down, so you can decide if you want the fan of your power supply pulling air from inside the case or from outside of it. The case comes with an adjustable support for the power supply.

If you install a power supply with a depth of up to 6.3” (160 mm), you can install either a 120 mm or a 140 mm fan on the bottom. With a power supply 6.5” (165 mm) deep, you can still install a 120 mm fan. However, if you install deeper power supplies, you won’t be able to install a fan on the bottom panel. As already shown, the case has a single air filter for the power supply fan and the bottom fan.

Figure 17: Power supply compartment