SilverStone Sugo SG07 Case Review

Inside the SilverStone Sugo SG07

The top cover of the case is attached to the chassis using regular screws, but painted black. In Figure 6, you see the Sugo SG07 with its top cover removed. The highlight of this case is its top 180 mm fan (S1803212HN-3M). The switch available on the rear panel allows you to choose between two speeds, 700 rpm (18 dBA) or 1,200 rpm (34 dBA). This fan comes with a washable air filter that is very easy to remove.

Figure 6: Overall look

Figure 7: The top fan and its air filter

Another ventilation option available in this case and that is very unique is a ventilation duct for the video card, shown in Figure 8. In order to use it, you have to remove the center piece of the rounded foam that comes with the product and install the resulting foam ring on the air filter, as shown in Figure 9. Then you need to screw the duct on the side panel, matching the position where the fan of your video card is located. Since the side panel has several holes, you will be able to perfectly match the position of this fan.

Figure 8: Air filter and foam disc

Figure 9: Video card duct assembled

Figure 10: Video card duct installed

In Figure 11, you can see the inside of the SG07 with the top fan removed. Although being very small, this case supports video cards up to 12.2” (310 mm) in length and CPU coolers up to 4.6” (117 mm) in height.

Figure 11: Inside the Sugo SG07