Thermaltake Jing CPU Cooler Review
Installation
Contents
In order to install the Jing, you need to remove the fans and attach two clips to the base of the cooler.
Figure 11: Clips attached to the base
Then, you will need to install the parts shown in Figure 12 on your motherboard, making a frame where you can screw the cooler in (shown in Figure 13).
Figure 12: Installation hardware for Intel CPUs
Figure 13: Frame mounted on the motherboard
In Figure 14, you can see the Jing installed in our case, with the fans reinstalled.
Figure 14: The Jing installed in our case