Thermaltake Smart 730 W Power Supply Review

Ripple and Noise Tests

Voltages at the power supply outputs must be as “clean” as possible, with no noise or oscillation (also known as “ripple”). The maximum ripple and noise levels allowed are 120 mV for +12 V and -12 V outputs, and 50 mV for +5 V, +3.3 V and +5VSB outputs. All values are peak-to-peak figures. We consider a power supply as being top-notch if it can produce half or less of the maximum allowed ripple and noise levels.

The Thermaltake Smart 730 W provided ripple and noise levels inside the proper range, as you can see in the table below.

Input	Test 1	Test 2	Test 3	Test 4	Test 5
+12VA	33.2 mV	21.0 mV	36.6 mV	49.2 mV	72.6 mV
+12VB	30.2 mV	21.2 mV	36.4 mV	48.8 mV	70.2 mV
+5 V	13.6 mV	11.2 mV	15.2 mV	17.8 mV	21.2 mV
+3.3 V	20.2 mV	13.4 mV	19.6 mV	21.2 mV	23.2 mV
+5VSB	21.4 mV	14.8 mV	21.6 mV	29.2 mV	32.4 mV
-12 V	55.2 mV	24.6 mV	59.4 mV	62.4 mV	65.6 mV

Below you can see the waveforms of the outputs during test five.

Figure 17: +12VA input from load tester during test five at 731.4 W (72.6 mV)

Figure 18: +12VB input from load tester during test five at 731.4 W (70.2 mV)

Figure 19: +5V rail during test five at 731.4 W (21.2 mV)

Figure 20: +3.3 V rail during test five at 731.4 W (23.2 mV)

Let’s see if we can pull more than 730 W from this unit.