Overload Tests
Contents
Below you can see the maximum we could pull from this power supply. We couldn’t pull more, as the power supply would shut down, showing that its protections are present and working fine. During this extreme configuration, noise and ripple levels were still below the maximum allowed, but the +3.3 V output dropped to +3.12 V and the +5VSB output dropped to +4.70 V, both below the minimum allowed.
| Input | Overload Test |
| +12VA | 29 A (348 W) |
| +12VB | 29 A (348 W) |
| +5 V | 16 A (80 W) |
| +3.3 V | 16 A (52.8 W) |
| +5VSB | 3 A (15 W) |
| -12 V | 0.5 A (6 W) |
| Total | 822.9 W |
| % Max Load | 112.7% |
| Room Temp. | 42.5° C |
| PSU Temp. | 50.8° C |
| AC Power | 1,043 W |
| Efficiency | 78.9% |
| AC Voltage | 109.4 V |
| Power Factor | 0.998 |
Leave a Reply