Thermaltake WATER2.0 Pro CPU Cooler Review
Installation
Contents
In Figure 9, you can see the backplate for use on Intel CPUs. You must insert the four nuts into the backplate before attaching it to the solder side of the motherboard.
Figure 9: Backplate
The second step of the installation is a little tricky and may be puzzling for some users. You must mount the frame with the pieces shown in Figures 10 and 11 according to the socket of your CPU.
Figure 10: Frame
Figure 11: Frame
Then, install the frame on the block, as shown in Figure 12.
Figure 12: Frame installed
The last step is to install the system inside the computer, attaching the block on the CPU and the radiator on the rear panel. (You must remove the rear fan of your case, if it has one.) Both fans must be installed as exhaust.
Figure 13: Installation finished