Zalman VF2000 LED Hybrid Cooler Review
Installation on CPUs
Contents
VF2000 LED installation as a CPU cooler is relatively simple. First you must screw the clip set according to the CPU you have, Intel socket LGA775 (it does not support 1156 and 1366 sockets) or AMD sockets AM3, AM2+ and AM2, to the base of the cooler. Then install four screws to the clips and put the rubber washers on the screws, as you see in Figure 10.
Figure 10: Socket LGA775 clips installed.
After that, apply thermal compound, put the cooler on the CPU and screw four thumbnuts (with springs) on the solder side of the motherboard.
Figure 11: Thumbnuts.
In Figure 12, you can see the cooler installed on our motherboard. It has a very low profile and will surely fit any case, even slim and SFF models.
Figure 12: Installed on our motherboard.
In Figure 13, you can see the cooler installed in our case.
Figure 13: Installed in our case.