Zalman VF2000 LED Hybrid Cooler Review
Installation on Video Cards
Contents
Installing VF2000 LED on a video card is as simple as on a CPU. You just need to attach four screws (not the same ones used for CPU installation) directly on the base of the cooler, put the cooler in place and attach it with the same thumbnuts.
We instaled the cooler on our PNY Verto GeForce 9600 GT video card. VF2000 LED comes with heatsinks for memory chips, which we did not install. The product is harmonious- and cool-looking, but has the problem of not blowing hot air outside the case. In Figures 14, 15, 16 and 17, you can see the cooler installed on our video card.
Figure 14: Installed on GeForce 9600 GT.
Figure 15: Top view.
Figure 16: Rear view.
Figure 17: Bottom view.
We try to install it on our GeForce GTS 250, but the position of the screws on VF200 LED was not compatible with the holes from this video card. So, we tested it only on our GeForce 9600 GT.