Installation
Contents
Figure 9 reveals the backplate (at the left), holders for AMD and Intel systems, and the transversal bar that holds the cooler, as well as the nuts used to install it and the wrench you will need to screw them.
Figure 9: Installation parts
Figure 10 shows the holders installed on our motherboard. After this step, just put the cooler in place, put the transversal bar over its base, and hold it with two nuts.
Figure 10: Holders
Figures 11 and 12 exhibit the ETS-T40-TA installed in our computer, before and after installing the fan in place.
Figure 11: Heatsink installed
Figure 12: Fan installed
In Figure 13 you see the ETS-T40-TA working. The 12 LEDs on the fan create a very beautiful effect.
Figure 13: Turned on
