Evercool Transformer 3 CPU Cooler Review
Installation
Contents
Figure 9 shows the clip used to install the Transformer 3 on AMD processors.
Figure 9: AMD clip
Figure 10 illustrates the Intel mounting system installed on our motherboard. It is a set of four ordinary screws inserted from the solder side of the motherboard, where you attach four nuts on the component side. There are plastic washers to avoid damaging the motherboard. After installing them, put the cooler over the CPU and attach four thumbnuts on the screws.
Figure 10: Mounting system for Intel CPUs
In Figure 11, you see the Transformer 3 heatsink installed on our motherboard. Also shown are the rubber fan holders.
Figure 11: Clips
Figure 12 presents the Transformer 3 installed in our case, with the fan in place.
Figure 12: Installed in our system