Huntkey Jumper 300G Planet3dnow.de Edition Power Supply Review
Main Specifications
Contents
The main specifications for the Huntkey Jumper 300G Planet3dnow.de Edition power supply include:
- Standards: ATX12V 2.3 and EPS12V 2.92
- Nominal labeled power: 300 W
- Measured maximum power: 401.6 W at 44.7° C ambient
- Labeled efficiency: 80 Plus Gold certification (87% minimum at 20% and 100% loads, 90% minimum at 50% load)
- Measured efficiency: Between 88.3% and 91.1%, at 115 V (nominal, see complete results for actual voltage)
- Active PFC: Yes
- Modu
lar Cabling System: No - Motherboard Power Connectors: One 24-pin connector and two ATX12V connectors that together form an EPS12V connector
- Video Card Power Connectors: One six-pin connector
- SATA Power Connectors: Four on two cables
- Peripheral Power Connectors: Three on two cables
- Floppy Disk Drive Power Connectors: None
- Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), and short-circuit (SCP) protections
- Are the above protections really available? Yes, but under voltage protection doesn’t monitor the +12 V rail
- Warranty: Three years
- More Information: https://www.huntkeydiy.com
- MSRP in Europe: € 64.90