LEPA B650 Power Supply Review

Main Specifications

The main specifications for the LEPA B650 power supply include:

• Standards: ATX12V 2.31 and EPS12V 2.92
• Nominal labeled power: 650 W
• Measured maximum power: 756.7 W at 47.8° C
• Labeled efficiency: Up to 88%, 80 Plus Bronze certification, 82% minimum at light (i.e., 20%) and full loads, and 85% minimum at typical (i.e., 50%) load
• Measured efficiency: Between 81.9% and 87.0%, at 115 V (nominal, see complete results for actual voltage)
• Active PFC: Yes
• Modular Cabling System: No
• Motherboard Power Connectors: One 20/24-pin connector and two ATX12V connectors that together form an EPS12V connector
• Video Card Power Connectors: Two six/eight-pin connectors on separate cables
• SATA Power Connectors: Seven on two cables
• Peripheral Power Connectors: Four on two cables
• Floppy Disk Drive Power Connectors: One
• Protections (as listed by the manufacturer): Over voltage (OVP), over current (OCP), over power (OPP), brown out, and short-circuit (SCP)
• Are the above protections really available? Over power protection (OPP) failed. This unit also has under voltage protection (UVP).
• Warranty: Three years
• More Information: https://www.lepatek.com
• Average Price in the U.S.*: USD 80.00

* Researched at Newegg.com on the day we published this review.