LEPA B650 Power Supply Review
Overload Tests
Contents
Below you can see the maximum we could pull from this power supply. The objective of this test is to see if the power supply has its protection circuits working properly. This unit failed this test, at it burned when we tried to pull more than described below.
| Input | Overload Test |
| +12VA | 29 A (348 W) |
| +12VB | 29 A (348 W) |
| +5 V | 10 A (50 W) |
| +3.3 V | 8 A (26.4 W) |
| +5VSB | 3 A (15 W) |
| -12 V | 0.5 A (6 W) |
| Total | 756.7 W |
| % Max Load | 116.4% |
| Room Temp. | 47.8° C |
| PSU Temp. | 52.8° C |
| AC Power | 961.0 W |
| Efficiency | 78.7% |
| AC Voltage | 107.4 V |
| Power Factor | 0.998 |