3R System AK6-500M Power Supply Review

Main Specifications

The main specifications for the 3R System AK6-500M power supply include:

• Standards: ATX12V 2.3
• Nominal labeled power: 500 W continuous, 600 W peak
• Measured maximum power: 698.2 W at 49.8° C
• Labeled efficiency: 80 Plus Bronze, 82% minimum at light (i.e., 20%) and full loads and 85% minimum at typical (i.e., 50%) load
• Measured efficiency: Between 81.6% and 85.8%, at 115 V (nominal, see complete results for actual voltage)
• Active PFC: Yes
• Modular Cabling System: Yes
• Motherboard Power Connectors: One 20/24-pin connector and two ATX12V connectors that together form an EPS12V connector, permanently attached to the power supply
• Video Card Power Connectors: Two six/eight-pin connectors on two cables, modular cabling system
• SATA Power Connectors: Three on one cable, modular cabling system
• Peripheral Power Connectors: Three on one cable, modular cabling system
• Floppy Disk Drive Power Connectors: One
• Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), over temperature (OTP), and short-circuit (SCP) protections
• Are the above protections really available? Yes
• Warranty: NA
• More Information: https://www.3rsys.com
• MSRP in the U.S.: NA